Hazardous Waste Disposal Birmingham

Hazardous waste disposal for Birmingham garages, engineering workshops, metal finishers and jewellery workshops, covering waste oil, coolant, acids, solvents, aerosols and contaminated rags.

HomeHazardous Waste Disposal Birmingham

Hazardous Waste Disposal Birmingham quote

Hazardous waste from Birmingham workshops

Birmingham’s motor trade, engineering firms and metal workshops produce a range of hazardous waste: used oil, brake fluid, degreasers, part-used aerosols, oily rags and filters, and acids from finishing work. Some coolants and other workshop liquids may also be hazardous, depending on their composition. These materials can accumulate through routine work, so the question is how each stream is kept separate, described and collected with the appropriate paperwork. The waste produced, its composition and how it is stored all matter when arranging collection.

Council household recycling centres serve residents. Waste from a business remains the responsibility of the business that produced it.

Stacked blue, red and grey steel drums lying on their sides, some scratched and stained

Streams kept separate

Oil, coolant, solvents and acids identified individually, with mixtures assessed according to their contents.

Consistent repeat paperwork

Recurring waste described consistently, with the details of each collection recorded on its consignment note.

Finishing solutions explained

Spent plating and pickling liquids assessed using their composition and how they were used.

Garage and engineering waste streams

Keeping streams apart is particularly important. Used engine oil collected on its own has a clearer description and may be suitable for recovery. The same oil with solvent, coolant or water tipped into it becomes a mixture that needs further assessment and may limit where it can go. Coolant, brake fluid, parts-washer solvent and aerosols need to be classified according to their contents and the process that produced them. See waste oil collection and aerosol disposal for the detail on two common workshop streams.

Jewellery and metal finishing workshops

Jewellery Quarter workshops and metal finishers elsewhere in the city work with pickling acids, plating and stripping solutions, polishing residues and contaminated wipes. Spent solutions can carry dissolved metals that the original product sheet does not mention, so a note of what each solution was used for helps classification. Acids, alkalis and solutions containing cyanide compounds need to be identified individually, with their contents and compatibility considered when arranging storage and collection. See acid disposal for spent acidic liquids.

Regular collections and one-off clearances

A workshop producing the same waste every few weeks benefits from consistent waste descriptions, with quantities and other consignment details recorded for each collection. This helps the receiving site identify the waste and understand its composition. A one-off clearance, such as a unit closing or a store being emptied before a move, needs an inventory of the materials present. Unlabelled containers, partly used chemicals and older products may need additional identification before collection can be arranged. Tell us which kind of job you have and what waste is present.

A row of used paint tins with dried paint runs on a wooden bench outside a red workshop door

Workshop or garage waste to clear in Birmingham?

Tell us which waste streams you produce and how they are stored, and we will come back to you.

Keeping the register

In England the producer or holder keeps a register for three years at the premises that produced or stored the waste. This includes copies of consignment notes, consignee returns from receiving sites and related documents such as carrier schedules. Before waste leaves, check that the carrier is registered with the Environment Agency and that the receiving site is authorised to accept the waste concerned. Birmingham falls within the Environment Agency’s West Midlands area.

Parts washers, wash bays and Severn Trent

Severn Trent is the sewerage undertaker for Birmingham. Trade effluent, such as wash bay run-off or rinse water from finishing lines, requires the sewerage undertaker’s consent before discharge to a public foul sewer. The consent specifies what may be discharged and under which conditions. Spent parts-washer solvent and other liquids not suitable or authorised for discharge need an appropriate waste collection and licensed disposal. The composition of each liquid matters when determining how it should be handled.

Before you ask for a quote

  • Each waste stream, what produced it and whether it has been mixed with anything
  • Container types, for example drums, waste oil tanks, jerrycans or aerosol cages
  • Approximate quantities and how often each stream builds up
  • Safety data sheets for current products, plus labels on anything decanted

For other cities see hazardous waste disposal in Manchester or our full list of areas we cover.

Hazardous Waste Disposal Birmingham: common questions

Can our Birmingham garage put used oil and coolant in the same container?

It is better not to. Used oil collected on its own is easier to describe and may be recoverable. Mixing it with coolant, solvent or water creates a mixture that needs further assessment and may narrow where it can be accepted. Keep each stream in its own labelled container.

Are oily rags and used filters from a workshop hazardous waste?

Oil filters are classified as hazardous waste. Rags and absorbents contaminated with hazardous substances, including certain oils and solvents, are also hazardous. Other contaminated materials depend on what they contain. Keep these materials separate from general waste and identify the contaminants when arranging collection.

How should a Jewellery Quarter workshop deal with spent pickling or plating solutions?

Keep spent solutions in suitable, compatible containers, labelled with what they contain and what they were used for. Do not combine different solutions without checking their compatibility. Dissolved metals picked up in use can affect classification, so a short note on the process helps establish the waste description.

Are old paint tins from a Birmingham workshop hazardous waste?

It depends on the paint and any remaining contents. Waste paint containing organic solvents or other hazardous substances falls under hazardous List of Waste entry 08 01 11*, while other waste paint falls under 08 01 12. Empty or contaminated packaging needs separate assessment. Tell us the product names, whether tins contain liquid or dried residue and roughly how many there are.

Can we wash parts-washer fluid or rinse water into the drain?

Trade effluent discharged to a public foul sewer needs consent from Severn Trent, the sewerage undertaker for Birmingham, and must meet the consent conditions. Spent parts-washer solvent should be treated as a waste stream for assessment and appropriate collection, rather than washed into a drain. Rinse water also needs assessment against the relevant consent.

Chemical Waste Disposal

Services

Request a quote

Menu

Get a quote