This index brings together chemical identities from the ILO / WHO International Chemical Safety Cards and the HSE GB mandatory classification and labelling list. Use the names, identifiers and available formulae to compare a product label, safety data sheet or waste inventory with the source record. Separate source entries may describe different forms or concentrations of the same substance. A match confirms only the source identity; it does not establish the composition of the waste, collection availability or a suitable treatment route. HSE identity information contains Crown copyright material reproduced under the Open Government Licence v3.0.
The detailed guides explain properties and waste-assessment points for particular chemicals. A chemical name or CAS number does not, on its own, establish a List of Waste code, packaging requirement, transport classification or receiving-facility acceptance.
Using chemical identity in a waste assessment
Identity is one part of the waste description. Concentration, process history, contamination and container condition can change the assessment even when the original product is known.
Identity: product name, CAS or EC number and the supplier safety data sheet.
Waste status: unused stock, spent process material, mixture or contaminated packaging.
Quantity and condition: amount, concentration, container sizes and container condition.
Process history: how the waste arose, including known additions, contaminants or any available analysis.
Source references and waste guidance
These sources cover chemical identity, safety data sheets and waste classification. Each has its own scope; none of them confirms that a particular waste load will be accepted by a receiving facility.
Hydrocarbons, C8-12, catalytic cracker distillates; Low boiling point cat-cracked naphtha; [A complex combination of hydrocarbons obtained by distillation of products from a catalytic cracking process. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C8 through C12 and boiling in the range of approximately 140 oC to 210 oC (284 oF to 410 oF).]
CAS 101794-97-2 · GB MCL 649-297-00-4 · EC 309-974-4
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 101896-28-0 · GB MCL 649-298-00-X · EC 309-987-5
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Hydrocarbons, C8-12, catalytic-cracking, chem. neutralized; Low boiling point cat-cracked naphtha; [A complex combination of hydrocarbons produced by the distillation of a cut from the catalytic cracking process, having undergone an alkaline washing. It consists predominantly of hydrocarbons having carbon numbers in the range of C8 through C12 and boiling in the range of approximately 130 oC to 210 oC (266 oF to 410 oF).]
CAS 92128-94-4 · GB MCL 649-296-00-9 · EC 295-794-0
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Hydrocarbons, C9-12, hydrotreated, dearomatized; Low boiling point hydrogen treated naphtha; [A complex combination of hydrocarbons obtained as solvents which have been subjected to hydrotreatment in order to convert aromatics to naphthenes by catalytic hydrogenation.]
CAS 93763-34-9 · GB MCL 649-344-00-9 · EC 297-853-6
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Hydrocarbons, C9-16, hydrotreated, dearomatized; Kerosine — unspecified; [A complex combination of hydrocarbons obtained as solvents which have been subjected to hydrotreatment in order to convert aromatics to naphthenes by catalytic hydrogenation.]
CAS 93763-35-0 · GB MCL 649-429-00-0 · EC 297-854-1
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 93763-38-3 · GB MCL 649-502-00-7 · EC 297-857-8
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Hydrocarbons, hydrotreated light naphtha distillates, solvent-refined; Low boiling point modified naphtha; [A combination of hydrocarbons obtained from the distillation of hydrotreated naphtha followed by a solvent extraction and distillation process. It consists predominantly of saturated hydrocarbons boiling in the range of approximately 94 oC to 99 oC (201 oF to 210 oF).]
CAS 92045-55-1 · GB MCL 649-285-00-9 · EC 295-436-3
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Reference entry from an ILO / WHO International Chemical Safety Card. The card defines the chemical identity and the scope of its safety information. Check the supplier safety data sheet for the actual product or formulation.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Reference entry from an ILO / WHO International Chemical Safety Card. The card defines the chemical identity and the scope of its safety information. Check the supplier safety data sheet for the actual product or formulation.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 113036-91-2 · GB MCL 030-008-00-X · EC 403-750-0
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 151841-65-5 · GB MCL 013-010-00-5 · EC 430-650-4
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 61420-92-6 · GB MCL 078-011-00-5 · EC 423-310-1
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
If you spot an error in this library, please contact us so we can check the entry against its source.
Contact us
The appropriate route for chemical waste depends on the material, concentration, condition, quantity and any contamination. The reference information in this library helps with identification, but it does not confirm that a particular waste will be accepted.
