This index brings together chemical identities from the ILO / WHO International Chemical Safety Cards and the HSE GB mandatory classification and labelling list. Use the names, identifiers and available formulae to compare a product label, safety data sheet or waste inventory with the source record. Separate source entries may describe different forms or concentrations of the same substance. A match confirms only the source identity; it does not establish the composition of the waste, collection availability or a suitable treatment route. HSE identity information contains Crown copyright material reproduced under the Open Government Licence v3.0.
The detailed guides explain properties and waste-assessment points for particular chemicals. A chemical name or CAS number does not, on its own, establish a List of Waste code, packaging requirement, transport classification or receiving-facility acceptance.
Using chemical identity in a waste assessment
Identity is one part of the waste description. Concentration, process history, contamination and container condition can change the assessment even when the original product is known.
Identity: product name, CAS or EC number and the supplier safety data sheet.
Waste status: unused stock, spent process material, mixture or contaminated packaging.
Quantity and condition: amount, concentration, container sizes and container condition.
Process history: how the waste arose, including known additions, contaminants or any available analysis.
Source references and waste guidance
These sources cover chemical identity, safety data sheets and waste classification. Each has its own scope; none of them confirms that a particular waste load will be accepted by a receiving facility.
Naphtha (petroleum), full-range alkylate, butane-contg.; Low boiling point modified naphta; [A complex combination of hydrocarbons produced by the distillation of the reaction products of isobutane with monoolefinic hydrocarbons usually ranging in carbon numbers from C3 through C5. It consists of predominantly branched chain saturated hydrocarbons having carbon numbers predominantly in the range of C7 through C12 with some butanes and boiling in the range of approximately 35 °C to 200 °C (95 °F to 428 °F).]
CAS 68527-27-5 · GB MCL 649-282-00-2 · EC 271-267-0
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), full-range alkylate; Low boiling point modified naphtha; [A complex combination of hydrocarbons produced by distillation of the reaction products of isobutane with monoolefinic hydrocarbons usually ranging in carbon numbers from C3 through C5 It consists of predominantly branched chain saturated hydrocarbons having carbon numbers predominantly in the range of C7 through C12 and boiling in the range of approximately 90 °C to 220 °C (194 °F to 428 °F).]
CAS 64741-64-6 · GB MCL 649-274-00-9 · EC 265-066-7
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), full-range coker; Low boiling point naphtha - unspecified; [A complex combination of hydrocarbons produced by the distillation of products from a fluid coker. It consists predominantly of unsaturated hydrocarbons having carbon numbers predominantly in the range of C4 through C15 and boiling in the range of approximately 43 °C to 250 °C (110 °F-500 °F).]
CAS 68513-02-0 · GB MCL 649-366-00-9 · EC 270-991-4
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), full-range reformed; Low boiling point cat-reformed naphtha; [A complex combination of hydrocarbons produced by the distillation of the products from a catalytic reforming process. It consists of hydrocarbons having carbon numbers predominantly in the range of C5 through C12 and boiling in the range of approximately 35 oC to 230 oC (95 oF to 446 oF).]
CAS 68919-37-9 · GB MCL 649-307-00-7 · EC 272-895-8
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), full-range straight-run; Low boiling point naphtha; [A complex combination of hydrocarbons produced by distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly in the range of C4 through C11 and boiling in the range of approximately – 20 °C to 220 °C (– 4 °F to 428 °F).]
CAS 64741-42-0 · GB MCL 649-265-00-X · EC 265-042-6
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), heavy alkylate; Low boiling point modified naphtha; [A complex combination of hydrocarbons produced by distillation of the reaction products of isobutane with monoolefinic hydrocarbons usually ranging in carbon numbers from C3 to C5. It consists of predominantly branched chain saturated hydrocarbons having carbon numbers predominantly in the range of C9 through C12 and boiling in the range of approximately 150 °C to 220 °C (302 °F to 428 °F).]
CAS 64741-65-7 · GB MCL 649-275-00-4 · EC 265-067-2
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), heavy catalytic cracked, sweetened; Low boiling point cat-cracked naphtha; [A complex combination of hydrocarbons obtained by subjecting a catalytic cracked petroleum distillate to a sweetening process to convert mercaptans or to remove acidic impurities. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C6 through C12 and boiling in the range of approximately 60 oC to 200 oC (140 oF to 392 oF).]
CAS 92045-50-6 · GB MCL 649-294-00-8 · EC 295-431-6
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), heavy catalytic cracked; Low boiling point cat-cracked naphtha; [A complex combination of hydrocarbons produced by a distillation of products from a catalytic cracking process. It consists of hydrocarbons having carbon numbers predominantly in the range of C6 through C12 and boiling in the range of approximately 65 oC to 230 oC (148 oF to 446 oF). It contains a relatively large proportion of unsaturated hydrocarbons.]
CAS 64741-54-4 · GB MCL 649-289-00-0 · EC 265-055-7
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), heavy catalytic reformed; Low boiling point cat-reformed naphtha; [A complex combination of hydrocarbons produced from the distillation of products from a catalytic reforming process. It consists of predominantly aromatic hydrocarbons having numbers predominantly in the range of C7 through C12 and boiling in the range of approximately 90 oC to 230 oC (194 oF to 446 oF).]
CAS 64741-68-0 · GB MCL 649-300-00-9 · EC 265-070-9
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), heavy coker; Kerosine — unspecified; [A complex combination of hydrocarbons from the distillation of products from a fluid coker. It consists predominantly of unsaturated hydrocarbons having carbon numbers predominantly in the range of C6 through C15 and boiling in the range of approximately 157 oC to 288 oC (315 oF to 550 oF).]
CAS 68333-23-3 · GB MCL 649-425-00-9 · EC 269-778-9
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), heavy hydrocracked; Low boiling point naphtha — unspecified; [A complex combination of hydrocarbons from distillation of the products from a hydrocracking process. It consists predominantly of saturated hydrocarbons having carbon numbers predominantly in the range of C6 through C12, and boiling in the range of approximately 65 oC to 230 oC (148 oF to 446 oF).]
CAS 64741-78-2 · GB MCL 649-349-00-6 · EC 265-079-8
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), heavy steam-cracked, hydrogenated; Low boiling point hydrogen treated naphtha
CAS 92045-51-7 · GB MCL 649-337-00-0 · EC 295-432-1
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), heavy straight run, arom.-contg.; Low boiling point naphtha; [A complex combination of hydrocarbons obtained from a distillation process of crude petroleum. It consists predominantly of hydrocarbons having carbon numbers in the range of C8 through C12 and boiling in the range of approximately 130 °C to 210 °C (266 °F to 410 °F).]
CAS 101631-20-3 · GB MCL 649-273-00-3 · EC 309-945-6
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), heavy straight-run; Low boiling point naphtha; [A complex combination of hydrocarbons produced by distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly in the range of C6 through C12 and boiling in the range of approximately 65 °C to 230 °C (149 °F to 446 °F).]
CAS 64741-41-9 · GB MCL 649-264-00-4 · EC 265-041-0
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), heavy thermal cracked; Low boiling point thermally cracked naphtha; [A complex combination of hydrocarbons from distillation of the products from a thermal cracking process. It consists predominantly of unsaturated hydrocarbons having carbon numbers predominantly in the range of C6 through C12 and boiling in the range of approximately 65 oC to 220 oC (148 oF to 428 oF).]
CAS 64741-83-9 · GB MCL 649-317-00-1 · EC 265-085-0
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), hydrodesulfurized full-range coker; Low boiling point naphtha — unspecified; [A complex combination of hydrocarbons obtained by fractionation from hydrodesulfurized coker distillate. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C5 to C11 and boiling in the range of approximately 23 oC to 196 oC (73 oF to 385 oF).]
CAS 101316-76-1 · GB MCL 649-396-00-2 · EC 309-879-8
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), hydrodesulfurized full-range; Low boiling point hydrogen treated naphtha; [A complex combination of hydrocarbons obtained from a catalytic hydrodesulfurization process. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C4 through C11 and boiling in the range of approximately 30 oC to 250 oC (86 oF to 482 oF).]
CAS 92045-52-8 · GB MCL 649-338-00-6 · EC 295-433-7
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), hydrodesulfurized light, dearomatized; Low boiling point naphtha — unspecified; [A complex combination of hydrocarbons obtained by distillation of hydrodesulfurized and dearomatized light petroleum fractions. It consists predominantly of C7 paraffins and cycloparaffins boiling in a range of approximately 90 oC to 100 oC (194 oF to 212 oF).]
CAS 92045-53-9 · GB MCL 649-383-00-1 · EC 295-434-2
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), hydrodesulfurized light; Low boiling point hydrogen treated naphtha; [A complex combination of hydrocarbons obtained from a catalytic hydrodesulfurization process. It consists of hydrocarbons having carbon numbers predominantly in the range of C4 through C11 and boiling in the range of approximately – 20 °C to 190 °C (– 4 °F to 374 °F).]
CAS 64742-73-0 · GB MCL 649-329-00-7 · EC 265-178-6
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), hydrodesulfurized thermal cracked light; Low boiling point hydrogen treated naphtha; [A complex combination of hydrocarbons obtained by fractionation of hydrodesulfurized thermal cracker distillate. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C5 to C11 and boiling in the range of approximately 23 oC to 195 oC (73 oF to 383 oF).]
CAS 85116-60-5 · GB MCL 649-335-00-X · EC 285-511-9
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
naphtha (petroleum), hydrodesulphurized heavy; Low boiling point hydrogen treated naphtha; [A complex combination of hydrocarbons obtained from a catalytic hydrodesulfurization process. It consists of hydrocarbons having carbon numbers predominantly in the range of C7 through C12 and boiling in the range of approximately 90 oC to 230 oC (194 oF to 446 oF).]
CAS 64742-82-1 · GB MCL 649-330-00-2 · EC 265-185-4
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), hydrotreated light steam-cracked; Low boiling point hydrogen treated naphtha; [A complex combination of hydrocarbons obtained by treating a petroleum fraction, derived from a pyrolysis process, with hydrogen in the presence of a catalyst. It consists predominantly of unsaturated hydrocarbons having carbon numbers predominantly in the range of C5 through C11 and boiling in the range of approximately 35 oC to 190 oC (95 oF to 374 oF).]
CAS 92045-57-3 · GB MCL 649-339-00-1 · EC 295-438-4
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), hydrotreated light, cycloalkane-contg.; Low boiling point hydrogen treated naphtha; [A complex combination of hydrocarbons obtained from the distillation of a petroleum fraction. It consists predominantly of alkanes and cycloalkanes boiling in the range of approximately – 20 °C to 190 °C (– 4 °F to 374 °F).]
CAS 85116-61-6 · GB MCL 649-336-00-5 · EC 285-512-4
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Naphtha (petroleum), hydrotreated light; Low boiling point hydrogen treated naphtha; [A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C4 through C11 and boiling in the range of approximately minus 20 oC to 190 oC (- 4 oF to 374 oF).]
CAS 64742-49-0 · GB MCL 649-328-00-1 · EC 265-151-9
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
If you spot an error in this library, please contact us so we can check the entry against its source.
Contact us
The appropriate route for chemical waste depends on the material, concentration, condition, quantity and any contamination. The reference information in this library helps with identification, but it does not confirm that a particular waste will be accepted.
