This index brings together chemical identities from the ILO / WHO International Chemical Safety Cards and the HSE GB mandatory classification and labelling list. Use the names, identifiers and available formulae to compare a product label, safety data sheet or waste inventory with the source record. Separate source entries may describe different forms or concentrations of the same substance. A match confirms only the source identity; it does not establish the composition of the waste, collection availability or a suitable treatment route. HSE identity information contains Crown copyright material reproduced under the Open Government Licence v3.0.
The detailed guides explain properties and waste-assessment points for particular chemicals. A chemical name or CAS number does not, on its own, establish a List of Waste code, packaging requirement, transport classification or receiving-facility acceptance.
Using chemical identity in a waste assessment
Identity is one part of the waste description. Concentration, process history, contamination and container condition can change the assessment even when the original product is known.
Identity: product name, CAS or EC number and the supplier safety data sheet.
Waste status: unused stock, spent process material, mixture or contaminated packaging.
Quantity and condition: amount, concentration, container sizes and container condition.
Process history: how the waste arose, including known additions, contaminants or any available analysis.
Source references and waste guidance
These sources cover chemical identity, safety data sheets and waste classification. Each has its own scope; none of them confirms that a particular waste load will be accepted by a receiving facility.
CAS 149564-66-9 · GB MCL 611-114-00-0 · EC 414-250-7
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 193562-37-7 · GB MCL 607-603-00-3 · EC 429-730-1
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 108624-00-6 · GB MCL 016-045-00-4 · EC 401-560-2
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Lubricating greases; Grease; [A complex combination of hydrocarbons having carbon numbers predominantly in the range of C12 through C50. May contain organic salts of alkali metals, alkaline earth metals, and/or aluminium compounds.]
CAS 74869-21-9 · GB MCL 649-243-00-X · EC 278-011-7
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Lubricating oils (petroleum), base oils, paraffinic; Baseoil — unspecified; [A complex combination of hydrocarbons obtained by refining of crude oil. It consists predominantly of aromatics, naphthenics and paraffinics and produces a finished oil with a viscosity of 120 SUS at 100 oF (23cSt at 40 oC).]
CAS 93572-43-1 · GB MCL 649-501-00-1 · EC 297-474-6
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Lubricating oils (petroleum), C>25, solvent-extd., deasphalted, dewaxed, hydrogenated; Baseoil — unspecified; [A complex combination of hydrocarbons obtained by solvent extraction and hydrogenation of vacuum distillation residues. It consists predominantly of hydrocarbons having carbon numbers predominantly greater than C25 and produces a finished oil with a viscosity in the order of 32cSt to 37cSt at 100 oC (212 oF).]
CAS 101316-69-2 · GB MCL 649-527-00-3 · EC 309-874-0
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Lubricating oils (petroleum), C15-30, hydrotreated neutral oil-based; Baseoil — unspecified; [A complex combination of hydrocarbons obtained by treating light vacuum gas oil and heavy vacuum gas oil with hydrogen in the presence of a catalyst in a two stage process with dewaxing being carried out between the two stages. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C15 through C30 and produces a finished oil having a viscosity of approximately 15cSt at 40 oC. It contains a relatively large proportion of saturated hydrocabons.]
CAS 72623-86-0 · GB MCL 649-482-00-X · EC 276-737-9
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Lubricating oils (petroleum), C17-32, solventextd., dewaxed, hydrogenated; Baseoil — unspecified; [A complex combination of hydrocarbons obtained by solvent extraction and hydrogenation of atmospheric distillation residues. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C17 through C32 and produced a finished oil with a viscosity in the order of 17cSt to 23cSt at 40 oC (104 oF.]
CAS 101316-70-5 · GB MCL 649-528-00-9 · EC 309-875-6
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 92045-42-6 · GB MCL 649-497-00-1 · EC 295-423-2
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 97488-95-4 · GB MCL 649-514-00-2 · EC 307-034-8
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Lubricating oils (petroleum), C18-40, solvent-dewaxed hydrogenated raffinate-based; Baseoil — unspecified; [A complex combination of hydrocarbons obtained by solvent deparaffination of the hydrogenated raffinate obtained by solvent extraction of a hydrotreated petroleum distillate. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C18 through C40 and boiling in the range of approximately 370 oC to 550 oC (698 oF to 1022 oF).]
CAS 94733-16-1 · GB MCL 649-507-00-4 · EC 305-595-3
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Lubricating oils (petroleum), C18-40, solventdewaxed hydrocracked distillate-based; Baseoil — unspecified; [A complex combination of hydrocarbons obtained by solvent deparaffination of the distillation residue from hydrocracked petroleum. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C18 through C40 and boiling in the range of approximately 370 oC to 550 oC (698 oF to 1022 oF).]
CAS 94733-15-0 · GB MCL 649-506-00-9 · EC 305-594-8
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Lubricating oils (petroleum), C20-35, solventextd., dewaxed, hydrogenated; Baseoil — unspecified; [A complex combination of hydrocarbons obtained by solvent extraction and hydrogenation of atmospheric distillation residues. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C35 and produces a finished oil with a viscosity in the order of 37cSt to 44cSt at 40 oC (104 oF).]
CAS 101316-71-6 · GB MCL 649-529-00-4 · EC 309-876-1
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Lubricating oils (petroleum), C24-50, solventextd., dewaxed, hydrogenated; Baseoil — unspecified; [A complex combination of hydrocarbons obtained by solvent extraction and hydrogenation of atmospheric distillation residues. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C24 through C50 and produces a finished oil with a viscosity in the order of 16cSt to 75cSt at 40 oC (104 oF).]
CAS 101316-72-7 · GB MCL 649-530-00-X · EC 309-877-7
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 92045-43-7 · GB MCL 649-498-00-7 · EC 295-424-8
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Lubricating oils; Baseoil — unspecified; [A complex combination of hydrocarbons obtained from solvent extraction and dewaxing processes. It consists predominantly of saturated hydrocarbons having carbon numbers in the range C15 through C50.]
CAS 74869-22-0 · GB MCL 649-484-00-0 · EC 278-012-2
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 103055-07-8 · GB MCL 616-050-00-7 · EC 410-690-9
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 17092-80-7 · GB MCL 601-047-00-5 · EC 404-150-1
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 16949-65-8 · GB MCL 009-018-00-3 · EC 241-022-2
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
main component 6 (isomer): asym. 1:2 Cr(III)-complex of: A: 3-hydroxy-4-(2-hydroxy-naphthalene-1-ylazo)naphthalene-1-sulfonic acid, Na-salt and B: 1-[2-hydroxy-5-(4-methoxy-phenylazo)phenylazo]naphthalene-2-ol; main component 8 (isomer): asym. 1:2 Crcomplex of: A: 3-hydroxy-4-(2-hydroxynaphthalene-1-ylazo)-naphthalene-1-sulfonic acid, Na-salt and B: 1-[2-hydroxy-5-(4-methoxy-phenylazo)-phenylazo]-naphthalene-2-ol
CAS 30785-74-1 · GB MCL 611-121-00-9 · EC 417-280-9
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 7785-87-7 · GB MCL 025-003-00-4 · EC 232-089-9
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Margosa, ext. [from the kernels of Azadirachta indica extracted with water and further processed with organic solvents]
CAS 84696-25-3 · GB MCL 650-058-00-1 · EC 283-644-7
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
If you spot an error in this library, please contact us so we can check the entry against its source.
Contact us
The appropriate route for chemical waste depends on the material, concentration, condition, quantity and any contamination. The reference information in this library helps with identification, but it does not confirm that a particular waste will be accepted.
