This index brings together chemical identities from the ILO / WHO International Chemical Safety Cards and the HSE GB mandatory classification and labelling list. Use the names, identifiers and available formulae to compare a product label, safety data sheet or waste inventory with the source record. Separate source entries may describe different forms or concentrations of the same substance. A match confirms only the source identity; it does not establish the composition of the waste, collection availability or a suitable treatment route. HSE identity information contains Crown copyright material reproduced under the Open Government Licence v3.0.
The detailed guides explain properties and waste-assessment points for particular chemicals. A chemical name or CAS number does not, on its own, establish a List of Waste code, packaging requirement, transport classification or receiving-facility acceptance.
Using chemical identity in a waste assessment
Identity is one part of the waste description. Concentration, process history, contamination and container condition can change the assessment even when the original product is known.
Identity: product name, CAS or EC number and the supplier safety data sheet.
Waste status: unused stock, spent process material, mixture or contaminated packaging.
Quantity and condition: amount, concentration, container sizes and container condition.
Process history: how the waste arose, including known additions, contaminants or any available analysis.
Source references and waste guidance
These sources cover chemical identity, safety data sheets and waste classification. Each has its own scope; none of them confirms that a particular waste load will be accepted by a receiving facility.
coconut oil, reaction products with glycerol esters of 3,5-bis(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid
CAS 179986-09-5 · GB MCL 607-559-00-5 · EC 425-400-6
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
complex reaction mass of Chinese gum rosin post reacted with acrylic acid
CAS 144413-22-9 · GB MCL 607-682-00-4 · EC 434-230-1
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
constitutional isomers of penta-O-allyl-β-Dfructofuranosyl-α-D-glucopyranoside; constitutional isomers of hexa-O-allyl-β-Dfructofuranosyl-α-D-glucopyranoside; constitutional isomers of hepta-O-allyl-β-Dfructofuransoyl-α-D-glucopyranoside
CAS 68784-14-5 · GB MCL 614-029-00-7 · EC 419-640-0
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Copolymer of vinyl-alcohol and vinyl acetate partially acetilized with 4-(2-(4-formylphenyl)ethenyl)-1-methylpyridinium methylsulfate
CAS 125229-74-5 · GB MCL 607-385-00-X · EC 414-590-6
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 7758-89-6 · GB MCL 029-001-00-4 · EC 231-842-9
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 20427-59-2 · GB MCL 029-021-00-3 · EC 243-815-9
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 1111-67-7 · GB MCL 029-015-00-0 · EC 214-183-1
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 12069-69-1 · GB MCL 029-020-00-8 · EC 235-113-6
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 54253-62-2 · GB MCL 029-008-00-2 · EC 405-400-2
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 1317-38-0 · GB MCL 029-016-00-6 · EC 215-269-1
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 5836-29-3 · GB MCL 607-059-00-7 · EC 227-424-0
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Creosote oil, acenaphthene fraction, acenaphthene- free; Wash Oil Redistillate; [The oil remaining after removal by a crystallization process of acenaphthene from acenaphthene oil from coal tar. Composed primarily of naphthalene and alkylnaphthalenes.]
CAS 90640-85-0 · GB MCL 648-043-00-X · EC 292-606-9
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Creosote oil, acenaphthene fraction; Wash Oil; [A complex combination of hydrocarbons produced by the distillation of coal tar and boiling in the range of approximately 240 °C to 280 °C (464 °F to 536 °F). Composed primarily of acenaphthene, naphthalene and alkyl naphthalene.]
CAS 90640-84-9 · GB MCL 648-098-00-X · EC 292-605-3
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Creosote oil, high-boiling distillate; Wash Oil; [The high-boiling distillation fraction obtained from the high temperature carbonization of bituminous coal which is further refined to remove excess crystalline salts. It consists primarily of creosote oil with some of the normal polynuclear aromatic salts, which are components of coal tar distillates, removed. It is crystal free at approximately 5 °C (41 °F).]
CAS 70321-79-8 · GB MCL 648-100-00-9 · EC 274-565-9
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Creosote oil, low-boiling distillate; Wash Oil; [The low-boiling distillation fraction obtained from the high temperature carbonization of bituminous coal, which is further refined to remove excess crystalline salts. It consists primarily of creosote oil with some of the normal polynuclear aromatic salts, which are components of coal tar distillate, removed. It is crystal free at approximately 38 °C (100 °F).]
CAS 70321-80-1 · GB MCL 648-138-00-6 · EC 274-566-4
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Creosote oil; [A complex combination of hydrocarbons obtained by the distillation of coal tar. It consists primarily of aromatic hydrocarbons and may contain appreciable quantities of tar acids and tar bases. It distills at the approximate range of 200 °C to 325 °C (392 °F to 617 °F).]
CAS 61789-28-4 · GB MCL 648-099-00-5 · EC 263-047-8
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 7700-17-6 · GB MCL 015-109-00-9 · EC 231-720-5
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
If you spot an error in this library, please contact us so we can check the entry against its source.
Contact us
The appropriate route for chemical waste depends on the material, concentration, condition, quantity and any contamination. The reference information in this library helps with identification, but it does not confirm that a particular waste will be accepted.
