This index brings together chemical identities from the ILO / WHO International Chemical Safety Cards and the HSE GB mandatory classification and labelling list. Use the names, identifiers and available formulae to compare a product label, safety data sheet or waste inventory with the source record. Separate source entries may describe different forms or concentrations of the same substance. A match confirms only the source identity; it does not establish the composition of the waste, collection availability or a suitable treatment route. HSE identity information contains Crown copyright material reproduced under the Open Government Licence v3.0.
The detailed guides explain properties and waste-assessment points for particular chemicals. A chemical name or CAS number does not, on its own, establish a List of Waste code, packaging requirement, transport classification or receiving-facility acceptance.
Using chemical identity in a waste assessment
Identity is one part of the waste description. Concentration, process history, contamination and container condition can change the assessment even when the original product is known.
Identity: product name, CAS or EC number and the supplier safety data sheet.
Waste status: unused stock, spent process material, mixture or contaminated packaging.
Quantity and condition: amount, concentration, container sizes and container condition.
Process history: how the waste arose, including known additions, contaminants or any available analysis.
Source references and waste guidance
These sources cover chemical identity, safety data sheets and waste classification. Each has its own scope; none of them confirms that a particular waste load will be accepted by a receiving facility.
Residues (petroleum), catalytic reformer fractionator; Heavy Fuel oil; [A complex combination of hydrocarbons produced as the residual fraction from distillation of the product from a catalytic reforming process. It consists of predominantly aromatic hydrocarbons having carbon numbers predominantly in the range of C10 through C25 and boiling in the range of approximately 160 oC to 400 oC (320 oF to 725 oF). This stream is likely to contain 5 wt. % or more of 4- or 6-membered condensed ring aromatic hydrocarbons.]
CAS 64741-67-9 · GB MCL 649-048-00-X · EC 265-069-3
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), coker scrubber, Condensed- ring-arom.-contg.; Heavy Fuel oil; [A very complex combination of hydrocarbons produced as the residual fraction from the distillation of vaccum residuum and the products from a thermal cracking process. It consists predominantly of hydrocarbons having carbon numbers predominantly greater than C20 and boiling above approximately 350 oC (662 oF). This stream is likely to contain 5 wt.% or more of 4- to 6-membered condensed rind aromatic hydrocarbons.]
CAS 68783-13-1 · GB MCL 649-033-00-8 · EC 272-187-9
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), heavy coker and light vacuum; Heavy Fuel oil; [A complex combination of hydrocarbons produced as the residual fraction from the distillation of heavy coker gas oil and light vacuum gas oil. It consists predominantly of hydrocarbons having carbon numbers predominantly greater than C13 and boiling above approximately 230 oC (446 oF).]
CAS 68512-61-8 · GB MCL 649-027-00-5 · EC 270-983-0
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), heavy coker gas oil and vacuum gas oil; Heavy Fuel oil; [A complex combination of hydrocarbons produced as the residual fraction from the distillation of heavy coker gas oil and vacuum gas oil. It predominantly consists of hydrocarbons having carbon numbers predominantly greater than C13 and boiling above approximately 230 oC (446 oF).]
CAS 68478-17-1 · GB MCL 649-026-00-X · EC 270-796-4
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), hydrocracked; Heavy Fuel oil; [A complex combination of hydrocarbons produced as the residual fraction from distillation of the products of a hydrocracking process. It consists of hydrocarbons having carbon numbers predominantly greater than C20 and boiling above approximately 350 oC (662 oF).]
CAS 64741-75-9 · GB MCL 649-012-00-3 · EC 265-076-1
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), hydrodesulfurized atmospheric tower; Heavy Fuel oil; [A complex combination of hydrocarbons obtained by treating an atmospheric tower residuum with hydrogen in the presence of a catalyst under conditions primarily to remove organic sulfur compounds. It consists of hydrocarbons having carbon numbers predominantly greater than C20 and boiling above approximately 350 oC (662 oF). This stream is likely to contain 5 wt. % or more of 4- to 6-membered condensed ring aromatic hydrocarbons.]
CAS 64742-78-5 · GB MCL 649-016-00-5 · EC 265-181-2
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), hydrogenated steamcracked naphtha; Cracked gasoil; [A complex combination of hydrocarbons obtained as a residual fraction from the distillation of hydrotreated steam-cracked naphtha. It consists predominantly of hydrocarbons boiling in the range of approximately 200 oC to 350 oC (32 oF to 662 oF).]
CAS 92062-00-5 · GB MCL 649-445-00-8 · EC 295-514-7
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), light vacuum; Heavy Fuel oil; [A complex residuum from the vacuum distillation of the residuum from the atmospheric distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly greater than C13 and boiling above approximately 230 oC (446 oF).]
CAS 68512-62-9 · GB MCL 649-028-00-0 · EC 270-984-6
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), steam-cracked heatsoaked naphtha; Cracked gasoil; [A complex combination of hydrocarbons obtained as residue from the distillation of steam cracked heat soaked naphtha and boiling in the range of approximately 150 oC to 350 oC (302 oF to 662 oF).]
CAS 93763-85-0 · GB MCL 649-448-00-4 · EC 297-905-8
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), steam-cracked light, arom.; Low boiling point naphtha — unspecified; [A complex combination of hydrocarbons obtained by the distillation of the products of steam cracking or similar processes after taking off the very light products resulting in a residue starting with hydrocarbons having carbon numbers greater than C5. It consists predominantly of aromatic hydrocarbons having carbon numbers greater than C5 and boiling above approximately 40 oC (104 oF).]
CAS 102110-55-4 · GB MCL 649-400-00-2 · EC 310-057-6
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), steam-cracked light; Heavy Fuel oil; [A complex residuum from the distillation of the products from a steam-cracking process. It consists predominantly of aromatic and unsaturated hydrocarbons having carbon numbers greater than C7 and boiling in the range of approximately 101 oC to 555 oC (214 oF to 1030 oF).]
CAS 68513-69-9 · GB MCL 649-029-00-6 · EC 271-013-9
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), steam-cracked naphtha distn.; Cracked gasoil; [A complex combination of hydrocarbons obtained as a column bottom from the separation of effluents from steam cracking naphtha at a high temperature. It boils in the range of approximately 147 oC to 300 oC (297 oF to 572 oF) and produces a finished oil having a viscosity of 18cSt at 50 oC.]
CAS 92062-04-9 · GB MCL 649-446-00-3 · EC 295-517-3
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), steam-cracked, distillates; Heavy Fuel oil; [A complex combination of hydrocarbons obtained during the production of refined petroleum tar by the distillation of steam cracked tar. It consists predominantly of aromatic and other hydrocarbons and organic sulfur compounds.]
CAS 90669-75-3 · GB MCL 649-040-00-6 · EC 292-657-7
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), steam-cracked, resinous; Heavy Fuel oil; [A complex residuum from the distillation of steam-cracked petroleum residues.]
CAS 68955-36-2 · GB MCL 649-035-00-9 · EC 273-272-3
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), steam-cracked; Heavy Fuel oil; [A complex combination of hydrocarbons obtained as the residual fraction from the distillation of the products of a steam cracking process (including steam cracking to produce ethylene). It consists predominantly of unsaturated hydrocarbons having carbon numbers predominantly greater than C14 and boiling above approximately 260 oC (500 oF). This stream is likely to contain 5 wt. % or more of 4- to 6-membered condensed ring aromatic hydrocarbons.]
CAS 64742-90-1 · GB MCL 649-018-00-6 · EC 265-193-8
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), thermal cracked; Heavy Fuel oil; [A complex combination of hydrocarbons produced as the residual fraction from distillation of the product from a thermal cracking process. It consists predominantly of unsaturated hydrocarbons having carbon numbers predominantly greater than C20 and boiling above approximately 350 oC (662 oF). This stream is likely to contain 5 wt. % or more of 4- to 6-membered condensed ring aromatic hydrocarbons.]
CAS 64741-80-6 · GB MCL 649-013-00-9 · EC 265-081-9
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), topping plant, lowsulfur; Heavy Fuel oil; [A low-sulfur complex combination of hydrocarbons produced as the residual fraction from the topping plant distillation of crude oil. It is the residuum after the straight-run gasoline cut, kerosene cut and gas oil cut have been removed.]
CAS 68607-30-7 · GB MCL 649-031-00-7 · EC 271-763-7
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues (petroleum), vacuum, light; Heavy Fuel oil; [A complex residuum from the vacuum distillation of the residuum from atmospheric distillation of crude oil. It consists predominantly of hydrocarbons having carbon numbers predominantly greater than C24 and boiling above approximately 390 oC (734 oF).]
CAS 90669-76-4 · GB MCL 649-041-00-1 · EC 292-658-2
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Residues, steam cracked, thermally treated; Heavy Fuel oil; [A complex combination of hydrocarbons obtained by the treatment and distillation of raw steam-cracked naphtha. It consists predominantly of unsaturated hydrocarbons boiling in the range above approximately 180 oC (356 oF).]
CAS 98219-64-8 · GB MCL 649-046-00-9 · EC 308-733-0
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 220727-26-4 · GB MCL 014-038-00-0 · EC 436-690-9
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
CAS 85702-90-5 · GB MCL 607-184-00-7 · EC 402-290-8
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
Reference entry from the HSE GB mandatory classification and labelling list. Use the listed chemical name and identifiers to compare with the product label and supplier safety data sheet. The reference identifies the substance; it does not classify a waste stream.
Identity reference only. The source helps identify the substance; it does not establish the composition or classification of a waste stream, or whether it will be accepted for treatment.
Reference notes and technical facts
Check the product label and supplier safety data sheet for the substance identity, concentration and formulation.
Waste assessment also depends on quantity, container condition, process history, mixing and contamination.
If you spot an error in this library, please contact us so we can check the entry against its source.
Contact us
The appropriate route for chemical waste depends on the material, concentration, condition, quantity and any contamination. The reference information in this library helps with identification, but it does not confirm that a particular waste will be accepted.
